
Sound you feel in your chest
Six channels of clean Class D power. 80W x 6 at 4 ohm, 130W x 6 at 2 ohm, or bridge to 260W x 3, so mids stay full and highs stay crisp at highway volume.
MX SERIES
MX MINI4S
MX FOUR.100
MX EIGHT.100
MX TWO.100
MX SIX.100
MX P2
MX FIVE.100+
NX SERIES
NX600.1
NX900.5
NX700.3
NX800.1
NX400.1
NX175.4
NX125.4
Monoblock
Musway ONE.600
Musway ONE.2000
Musway ONE.1000
Shallow Subwoofers
Musway MWS1044
Musway MWS844
Musway MWS822
Musway MWS1022
Mercedez-bench Direct-fit Subwoofers
CSM206W L/R
CSM206X
CSM206C
BMW Direct-Fit Subwoofers
CSB8W
CSB42X
CSB4.2C
Powered Subwoofers
Musway SW-A7
Musway MF108A
Musway MF110A
Subwoofers
CSM206W L/R
Musway MWS1044
Musway MWS844
Musway MWS822
Musway MWS1022
Musway MW622
Musway MG8
Musway MG12
Musway MG10
CSB8W
Accessories
Musway BTA-HD
Musway BTA2 Wireless Bluetooth and App Control
Musway DRC1 Controller
Musway BTS Wireless Bluetooth
High-Level Input - FOUR.100
Musway PK-RCA6
Musway MB-DRC Flush Mounts
Musway BTS HD Wireless Bluetooth
Vehicle Specific Plug and Play harnesess
MUSWAY MPK-VOL1M6
High-Level Input - FOUR.100
MPK-HY1M6
MPK-RCAD8
A 6-channel full-range Class D amplifier with an integrated 8-channel DSP running dual 32-bit Texas Instruments processors. 80 watts x 6, brushed aluminum, and it connects straight to your factory wiring.
2021 to 2026
Hi-Fi Product of the Year
100% German
Engineered and measured
3 Year
Warranty on every unit
Plug and Play
Factory-fit integration
Most factory systems are tuned for cost, not for music. The M6 512K sits between your factory head unit and your speakers and rewrites what they are capable of.

Six channels of clean Class D power. 80W x 6 at 4 ohm, 130W x 6 at 2 ohm, or bridge to 260W x 3, so mids stay full and highs stay crisp at highway volume.

The integrated 8-channel DSP runs on dual 32-bit 330 MIPS processors and corrects every factory EQ curve, time alignment gap, and crossover point.

Tune with the PC software over USB, or add the BTA-HD dongle and use the smartphone app. The myCon touchscreen controller puts presets and levels in your dash.

80W x 6 at 4 ohm, 130W x 6 at 2 ohm, bridged 260W x 3 at 4 ohm. Runs cool in a compact brushed aluminum housing.
Dual 32-bit 330 MIPS Texas Instruments processors handle EQ, time alignment, and crossovers for every channel.
Optical stereo PCM input up to 96 kHz 24-bit. Add the BTA-HD or BTS USB dongle for wireless streaming and app tuning.
Tune over USB with the Musway DSP software, or from your phone through the optional BTA-HD dongle.
Stable through start-stop cycles, with the Intelligent High-Level Input Error Protection System guarding the inputs.
Six high-level inputs from 4.8 to 20V RMS with turn-on by DC offset or signal sensing. No head unit swap.
| Amplifier type | 6-channel full range Class D |
|---|---|
| Power at 4 ohm | 80W x 6 |
| Power at 2 ohm | 130W x 6 |
| Bridged at 4 ohm | 260W x 3 |
| DSP | Integrated 8-channel, dual 32-bit 330 MIPS TI processors |
| Inputs | 6x high level 4.8 to 20V, 6x RCA 2 to 6V, 1x AUX RCA, 1x optical PCM 96 kHz 24-bit |
| Outputs | 6x high level, 2x pre-amp RCA up to 6.5V |
| Frequency response | 10 Hz to 20 kHz (-3 dB) |
| Signal to noise | 94 dB A-weighted |
| THD | 0.014% at 1 kHz, 4 ohm, 5W |
| Minimum load | 2 ohm per channel, 4 ohm bridged |
| Dimensions | 5.91 x 1.73 x 8.66 inches |
| Warranty | 3 years |
Add the PK-RCA6 RCA input harness at checkout if you are feeding the M6 from an aftermarket head unit with RCA outputs.
Wire the power harness and plug the input and output harness into your factory speaker wiring. No head unit replacement.
At 5.91 by 8.66 inches the brushed aluminum chassis fits under a seat or behind a trim panel. Class D runs cool with no fan.
Connect the USB tuning cable to the PC software, or pair the BTA-HD dongle and tune from the app in the driver's seat.
| Feature | Factory system | Generic amp | Musway M6 512K |
|---|---|---|---|
| Clean power to every speaker | − | ||
| Integrated 8-channel DSP | − | − | |
| Time alignment and crossovers | − | − | |
| Plug and play with factory wiring | − | ||
| Optical input and app tuning | − | − | |
| 3 year warranty | − | Varies | |
| Hi-Fi Product of the Year | − | − |
Order the M6 512K on its own, or pair it with the accessories built for it: the BTA-HD dongle for app tuning, the DRC1 remote, or the myCon touchscreen controller. Every kit ships free with the 3 year warranty.
Secure encrypted checkout. Ships within 24 hours from our US warehouse.
Still unsure if the M6 512K fits your vehicle? Every order includes free fitment and tuning support from the Musway USA team.
Yes. Six high-level inputs accept 4.8 to 20V factory speaker signals with auto turn-on by DC offset or signal sensing, so you keep your factory radio, steering wheel controls, and screen. It is also Start-Stop ready.
Many customers with basic tools finish in an afternoon using the included power and input harnesses and the wiring diagrams. A professional install is recommended if you are bridging channels or adding a subwoofer.
Connect the included USB tuning cable to the Musway DSP software on a PC, or add the BTA-HD dongle and tune from the smartphone app. The optional myCon controller adds a touchscreen for presets and levels in the dash.
Yes. Bridge two channels for 260W at 4 ohm to a subwoofer, or feed a Musway monoblock from the two pre-amp RCA outputs and control it through the same DSP.
Every M6 512K carries a 3 year warranty covering manufacturing defects. Register your unit at purchase and support is handled by the Musway USA team.
Return it within 30 days in its original packaging for a full refund. Shipping to you is free, and our team will help with the return label.
Upgrade without replacing a single factory part. Free nationwide shipping, a 3 year warranty, and 30 days to decide. Only 3 units in stock today.


Musway M6 512K
$1,049.95